TROUBLESHOOTING
Printing and Copying (2/2)
StatusCauseRemedyPage
Frequent paper mis-Attempting to print on both Print on only one side. Two-side p.10,18
feeds.sides of the paper.printing is not supported by this
machine.
Printing onto loosely Flatten the envelopes to expel allp.14
stacked envelopesair.
Misfeeding of the envelope Make sure that envelope flapsp.14
flap.are closed (folded down).
Part of the image isToner is distributed un- Remove the toner cassette, gen-p.52
unclear.evenly in the toner cassette. tly rock it left and right a few
times, and replace it into the
machine.
Black lines on theHeat damage to the toner Replace the toner cassette.p.52
printout.cassette caused by turning
off the machine too soon
after copying a large
number of pages.
Dark areas along theTurning off the machine too Replace the toner cassette.p.52
sides of the printout.soon after printing or copy-
ing a large number of
pages.
Printing
StatusCauseRemedyPage
Abnormal or unex-Use of wrong cable.Use the cable that comes withp.7
pected printing results.this machine.
Wrong printer driver set- Change to the correct printerp.23
tings.driver settings.
Attempting to print from a Change to 300 dpi.p.58
DOS application at 600 dpi.
Parts of the image areThe correct paper size is Specify the paper size using thep.19
not printed out.not specified.operation panel.
Cannot print from aSecond printer is not con- Check connections and makep.15
second printer.nected correctly.corrections, if necessary.
Second printer is not se- Press so the indi-p.26
lected.cator above it is lit.
Incorrect settings of the Use the printer driver of the sec-p.26
second printer driver.ond printer to turn off bi-direc-
tional printing.
40 |