DETAILED SECTION DESCRIPTIONSJune 10th, 1997
SCANNER
2.1.6. Error Conditions
1. Book Scanner
The FCIP2 detects an error if one of the following conditions occurs.
ConditionDescriptionError
Code
The scanner home position sensor did not turn on
after the motor moved 350 mm back to the 9-home90
position after scanning.
The scanner home position sensor stayed on after
Incorrect home positionthe motor moved 20 mm from the home positi9-on at91
the start of scanning.
sensor condition
During initialization, the scanner home position
sensor did not turn on after the motor mo9-ved 10092
mm.
During initialization, the scanner home position
9-93
sensor stayed on after the motor moved 100 mm.
2. ADF
The main cpu detects an error if one of the following conditions occurs.
Jam ConditionDescriptionError
Code
The scan line sensor does not switch on within
Non-feed1-00
2.0 s of the ADF motor starting.
The scanner home position sensor did not turn on
Incorrect sensor
after the motor moved 100 mm back to the 9-home94
conditions
position after scanning using ADF.
The scan line sensor does not turn off after the
maximum document length has been fed since it
Maximum document
turned on; this is after 23 s at standard an1-01d detail
length exceeded
resolution, or 46 s at fine resolution (these times
are for a 1.2 m long document).
When the final page of the document has been
fed out of the scanner, or when a jammed
document has been removed, the ADFNo error
Error during feed-out
initialization is done. The error occurs ifcod ae
document is placed into the feeder during
initialization.
While the machine is working, the ADF coNove er arrorer
Cover open
opened.code
2-8 |