Installing Options
KOpen the upper right cover (A)NClose the right cover by pushing
and slide the interchange unitthe area as shown in the illustra-
while keeping the cover perpen-tion.
dicular to the printer (B). At this
1time, confirm that the projection
(C) is placed in the hole securely
as shown in the illustration.
90ZAEP170E
OIf the mailbox is not installed, at-
tach the interchange unit cover
ZAEP160J that was removed in step I. At-
tach the side of the cover facing
LFasten the two screws with fin-the front of the printer first (A)
gers, while keeping the upperand then the other side of the cov-
right cover of the interchange uniter (B).
perpendicular to the printer, and
secure the interchange unit to theNote
printer. Use a coin to fasten ther To attach the mailbox, go to step
screws.P.
ZAEP161EZAEP180E
MClose the upper right cover of thePAttach the connector of the inter-
interchange unit.change unit to the socket on the
back of the printer as shown in
the illustration.
ZAEP162E
15
ZAEP190E |