BIT SWITCHES18 May, 1999
4.3 BIT SWITCHES
oCAUTION
Do not adjust bit switches labeled ?Not used?, as this may cause the
machine to malfunction. Such bits are only for use in other regions, such
as Japan.
oCAUTION
Do not turn off the power while the LCD displays ?Please wait? or
?Registered?.
NOTE: After setting the bit switches, turn the power off and on to cause the
change to take effect.
4.3.1 FUNCTION SWITCH PARAMETERS (SWFUNC)
Function switch parameters appear on the System Parameter List (service function
81) as SwFunc00 - 05; however, they cannot be accessed or changed using the
service mode functions.
SwFunc 00 (Function Switch 00)
NoFUNCTIONNOTE
0-7 Number for the remote change from00 - 09 ( TELH)
to FAXDefault value: 02(H)
SwFunc 01 (Function Switch 01)
NoFUNCTIONNOTE
0Not usedDo not change this setting
1Dialing type
0: Pulse dialing (10pps)
1: Tone (DTMF) dialing
2-3 PSTN access method from behind a
PABX
Bit 3 2 Setting
0 0 PSTN
0 1 Loop start
1 0 Ground start (Europe &
Asia models only,
excluding France models)
1 1 Flash start (Europe & Asia
models only)
4Not usedDo not change this setting
5Remote change from Fax mode to Tel
mode
0: Disabled
1: Enabled
4-14 |